Floor Impressions Floor Mat

Floor Impressions are all rubber mats that feature a digital imprint. A digital imprint allows for much more detail; and bright, vivid colors can be easily achieved. Please refer to this product's Price List for details on the one-time PMS color matching set-up fee. A maximum of 4 PMS colors may be matched per design.*  

• Minimum Text Height: 1/4" (includes lowercase text)
  Minimum Line Thickness: 1/16"
  

These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.

White is prone to discolor and cannot be used as the background or any part of the imprint area. The product's color palette offers three light colors to use in place of White:  F5, N9 and N10. The background color of the imprint area should not be set to these light colors. It is difficult to keep the logo clean through the manufacturing process.

Solid color designs are not available and cannot be produced. The print area must be comprised of text and/or logo.

Mat Size                      Imprint Area
2' x 3' (22" x 34")         21" x 33"
2.5' x 3' (30" x 35")      29" x 34"
3' x 4' (34" x 46")         33" x 45"
3' x 5' (34" x 58")         33" x 57"
4' x 6' (46" x 69")        45" x 68"

*We will do our best to match a PMS color, however, color matching can be extremely challenging. Although we can get close, color is never an exact science and variations will occur. An exact color match is vulnerable to many factors, including the fact that we use a hot press to combine the rubber surface and cushion backing. Heat from the press often causes the color to lighten. Typically, we can get close to most PMS colors, but the final color may be a few shades off. For the PMS color to be as close as possible, we require additional time to create the proof sketch.

CONSTRUCTION
Material: Nitrile rubber
Logo/Image Material: Polymeric film

Overall Mat Thickness: 3/16 inch (0.1875" )

STANDARDS & TESTING

• Passes flammability standard DOC-FF1-70

2' x 3' (22" x 34")
2.5' x 3' (30" x 35")
3' x 4' (34" x 46")
3' x 5' (34" x 58")
4' x 6' (46" x 69")
Please note, mat size is approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Floor Impressions mats can be cleaned by using detergent with a neutral pH, and rinsing with a hose. Mats should be laid flat or hung mat to dry.

Always make sure the mat is dry before placing it back in service.