Classic Solutions Plus Mats

Recommended for indoor commercial use at entryways, in lobbies, at front desks or anywhere additional traction or moisture control is needed.

SURFACE
Material: Solution-dyed type 6 nylon
Construction: Cut pile
Weight: 23 ounces/yard2
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard2)

BACKING OPTIONS
Material: Nitrile rubber - smooth, universal cleated, or MegaHold
Thickness:
Medium duty 65-mil (body thickness 65-mil; border thickness 107 mil)
Heavy duty 90-mil (body thickness 90-mil; border thickness 90-mil)
MegaHold 100-mil (body thickness 100-mil; border thickness 100-mil)

Overall Mat Thickness: 3/8 inch (0.375")

STANDARDS & TESTING

• Passes flammability standard DOC FF1-70
• Certified high-traction by the National Floor Safety Institute (NFSI)

2' x 3' (24" x 35")
3' x 4' (35" x 47")
3' x 5' (35" x 59")
3' x 10' (35" x 118")
4' x 6' (45" x 69")
4' x 8' (45" x 95")
4' x 10' (45" x 119")
5' x 8' (58" x 95")*
5' x 10' (58" x 119") *
5' x 12' (58" x 143") *
6' x 8' (68" x 95") **
6' x 10' (68" x 119") **
6' x 12' (68" x 143") **

Available in custom sizes with widths of 3' (35"), 4' (45"), 5' (58") *, 6' (68") ** and lengths up to 40'.

*Note: 5-foot widths are available only in Brown Heather SDN, Charcoal Heather SDN, & Quarry SDN

*Note: 6-foot widths are available only in Brown Heather SDN & Charcoal Heather SDN

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Classic Solutions Plus mats can be cleaned in several different ways:

• Commercially laundered (see Laundering Instructions)
• Vacuumed regularly: daily in high-traffic areas, weekly in lower-traffic applications
• Cleaned with an extractor
• Hang mat to dry

Mats should always be dry before they are placed back in service, and cooled before rolling.

Classic Solutions Plus mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue.

For heavy soil, increase temperature to max 120-140 degrees F (49-60 degrees C). Break should not exceed pH of 9.5; use low pH non-ionic detergents.

1. Flush 2-3 minutes, medium water level, 100-120 degrees  F (38-49 degrees C)
2. Flush (optional) 2-3 minutes, medium water level, 100-120 degrees  F (38-49 degrees C)
3. Break 2-3 minutes, high water level, 100-120 degrees  F (38-49 degrees C)
4. Rinse 2 minutes, high water level, cold
5. Rinse 2 minutes, high water level, cold
6. Extract (low speed) 1-2 minutes
7. Shake out (rotate wheel at wash speed with drain open) 1 minute
8. Extract (low speed) 3-5 minutes
9. Dry 5-10 minutes, 180 degrees  F (82 degrees  C) basket temp.
10. Cool down 5 minutes
11. Lay mats flat following removal from washer or dryer. Allow to cool before rolling.

Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C). If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.